Showing all 14 results

  • Cylcoaliphatic amine cured novalac finish

    by ccadmin
    Read more

    Cylcoaliphatic amine cured novalac finish

    This Novalac coating is a two-component glass flake reinforced epoxy coating designed to withstand the high temperatures of hot steel structures while protecting against corrosion. This epoxy composite coating withstands continuous temperatures up to 250°C and peak temperatures as high as 300°C.

    Category:
  • Epoxy AL Mastic

    by ccadmin
    Read more

    Epoxy AL Mastic

    Aluminum-pigmented, low-stress, high-solids mastic with outstanding performance properties and proven field history. It was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3-cleaned steel.

    Category:
  • Epoxy coal tar Finish

    by ccadmin
    Read more

    Epoxy coal tar Finish

    Renowned high build coal tar epoxy polyamide for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.

    Category:
  • Epoxy DTM Finish

    by ccadmin
    Read more

    Epoxy DTM Finish

    DTM is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperatures.

    Category:
  • Epoxy GF Finish

    by ccadmin
    Read more

    Epoxy GF Finish

    A glass-reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the waterline) in marine applications where these resistance qualities are desired.

    Category:
  • Epoxy HB Finish

    by ccadmin
    Read more

    Epoxy HB Finish

    A combination of epoxy and polyamide resins with selected pigments designed specifically as a high chemical and corrosion resistance.

    Category:
  • Epoxy Mastic

    by ccadmin
    Read more

    Epoxy Mastic

    This is a two-component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long-lasting protection in environments with high corrosivity.

    Category:
  • Epoxy Micaceous Coating

    by ccadmin
    Read more

    Epoxy Micaceous Coating

    Epoxy Micaceous Coating is a low VOC, high solids, high build epoxy with pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop. A range of anticorrosive coating systems in a wide range of aggressive environments.

    Category:
  • Epoxy phenalkamine Mastic

    by ccadmin
    Read more

    Epoxy phenalkamine Mastic

    This is a two-component phenylamine cured epoxy mastic coating with high volume solids. It is surface tolerant and fast-drying and can be used as a primer or mid-coat for long-lasting protection in atmospheric environments.

    Category:
  • Epoxy Primer System

    by ccadmin
    Read more

    Epoxy Primer System

    It is a two-component, polyamine adduct cured epoxy primer pigmented with anti-corrosive zinc phosphate and Zinc Chrome. Offers excellent resistance to corrosion and exceptional adhesion to ferrous substrates. Comply with the requirements of BS5493.

    Category:
  • Epoxy Zinc HB Primer

    by ccadmin
    Read more

    Epoxy Zinc HB Primer

    A two-component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection, low-temperature cure, and rapid overcoating properties.

    Category:
  • Hybrid Epoxy Zinc rich Primer

    by ccadmin
    Read more

    Hybrid Epoxy Zinc rich Primer

    It is a high performance two-component zinc-rich epoxy primer where extended durability and excellent corrosion protection are required.It is come up with different zinc percentage. Complies with SSPC-Paint 20 level 2 and ISO 12944.5

    Category:
  • Inorganic Zinc Ethyl Silicate Primer/finish-Inorganosil

    by ccadmin
    Read more

    Inorganic Zinc Ethyl Silicate Primer/finish-Inorganosil

    This Primer/finish is designed to withstand high temperatures and provide good corrosion protection. It has been specifically designed for use on areas that operate at temperatures above 120°C and is resistant to continuous high temperatures up to 540 °C

    Category:
  • PU Finish

    by ccadmin
    Read more

    PU Finish

    Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, It provides a smooth, durable finish that has superior resistance to corrosion, abrasion, and chemical exposure.

    Category: